Overview

The ultimate tool for surface Eddy Current Array examination

SG NDT SHAPE probes are an ideal solution for examining surfaces with varying curvatures and geometries. They can be held in the hand or in a small probe holder, making them a versatile tool for initial testing and proof of concept verification before transitioning to a rigid probe with a fixed geometry.

The SHAPE-P-053-MR probe is a mid-resolution inspection probe with a rubber backing that ensures durability while minimizing the impact on flexibility. These probes have been field proven as an excellent probe choice for difficult inspections with geometric challenges.

The SHAPE probe can be customized to meet specific requirements, making it the ultimate tool for surface Eddy Current Array examination.

Interchangeability
The flexible array is easily detached from the cable and multiplexer (MUX) assembly and replaced using a single tool. This means that the array can be quickly and easily replaced by other similar arrays with a different coverage, resolution or topology.

Specifications

SHAPE-P-053-MR Specifications

Technology

PCB Coils

Frequency Range

50kHz – 500kHz

Coil OD

3.5mm

Coil Quantity

2 Rows of 16 (32 total)

Probe Coverage

53mm

Topology

Long Single Driver

Channels

31 Axial, 15 Transverses

(total 46)

Resolution

3.5mm Axial, 3.5mm
Transverse

Curve Radius

50mm

Typical Detectable Defect

> 2mm

Cable Length

3m Standard

Maximum Lift-Off

2.75mm

Are you interested in this product?

Our technical team is ready to answer you.

Contact Us
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.