Overview

An excellent probe choice for difficult inspections or small defects

SG NDT SHAPE probes are an ideal solution for examining surfaces with varying curvatures and geometries. They can be held in the hand or in a small probe holder, making them a versatile tool for initial testing and proof of concept verification before transitioning to a rigid probe with a fixed geometry.

The SHAPE-P-054-HR probe is a high-resolution inspection probe with a rubber backing that ensures durability while minimizing the impact on flexibility. These probes have been field-proven as an excellent probe choice for difficult inspections or small defects.

The SHAPE probe can be customized to meet specific requirements, making it the ultimate tool for surface Eddy Current Array examination.

Interchangeability

The flexible array is easily detached from the cable and multiplexer (MUX) assembly and replaced using a single tool. This means that the array can be quickly and easily replaced by other similar arrays with a different coverage, resolution or topology.

Specifications

SHAPE-P-054-HR Specifications

Technology

PCB Coils

Frequency Range

100kHz – 800kHz

Coil OD

3.5mm

Coil Quantity

2 Rows of 32 Intertwined
Coils (total 64)

Probe Coverage

54mm

Topology

Short Single Driver

Channels

31 Axial, 31 Transverses

(total 62)

Resolution

1.75mm Axial, 1.75mm
Transverse

Curve Radius

> 50mm

Typical Detectable Defect

> 0.5mm

Cable Length

3m Standard

Maximum Lift-Off

1.25mm

Are you interested in this product?

Our technical team is ready to answer you.

Contact Us
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.